We get requests every once in a while about Paddle Cleaners for the 35A kit.  If you have compressed air, then the best way to clean is with an air nozzle.  If you don't have compressed air, then a Paddle Cleaner is the way to go.  While we don't offer these for sale, we have built a few, and they work great.  Here are some photos, along with a Bill of Materials.

(Click on Photos for a Larger Image):

Bill of Materials 

Quan (2) - ½” Copper Pipe, 6.25” long
Quan (1) - ½” Copper Pipe, 8.0” long
Quan (1) - ½” Copper Pipe, 24.0” long
Quan (1) - ½” Copper Tee, McMaster #5520K71
Quan (1) - ½” Copper Elbow, McMaster #5520K61
Quan (1) - ½” Copper Cap, McMaster #5520K44
Quan (2) – 5/8” Bore Clamp-On Shaft Collar, McMaster #6435K15
Quan (1 bag) - ½” ID Felt Washer, McMaster #95571A845
Quan (1) – 12” x 12” Sheet PVC, 1/16” thick, McMaster #8747K111 

Tools

Cordless Drill
¼” Drill bit
5/8” Drill bit or Step Drill (recommended)
Hammer (to flatten the ends of the lower cross brace)
Tape Measure or Rule
Sharpie Marker
Center Punch
Soldering Torch, Flux, Solder, Pipe Cutter
Allen Wrenches
¼” bolt, ¼” nut
Self Drilling Screws and Driver
Sheet Metal Shears or Good Scissors
File
Sandpaper

 As always, please give us a call with any questions.

Back to 35A Page
Back to Notes Page
Back to Home Page